以杂交籼稻品种五丰优T025 、籼粳杂交稻品种甬优538、常规粳稻品种小叶迟熟为材料,设置5个钵苗机插密度(D1,33 cm ×12 cm;D2,33 cm ×13 cm;D3,33 cm ×14 cm;D4,33 cm ×15 cm;D5,33 cm ×16 cm),以毯苗机插为对照(CK,30.0 cm×13.2 cm),比较研究了不同钵苗机插密度对双季晚稻产量及群体质量的影响,旨在探明水稻钵苗机插在双季晚稻区的适宜栽插密度。试验结果表明:(1)三种类型水稻的产量均随移栽密度的增加而增加,相同密度条件下D1处理产量均极显著高于CK,2年平均增产8.13%~9.50%;(2)钵苗机插水稻移栽后群体的茎蘖数均表现为处理D1>D2>D3>D4>D5,与CK相比,D1处理的茎蘖数栽后增长快,拔节后群体茎蘖数消减缓慢,成穗率高;(3)移栽期至拔节期、拔节期至抽穗期、抽穗期至成熟期三种类型水稻钵苗机插的干物质积累量、群体生长率、光合势均表现为处理D1>D2>D3>D4>D5,移栽期至拔节期CK的干物质积累量和光合势大于D1处理,拔节期至抽穗期、抽穗期至成熟期D1的干物质积累量、群体生长率及光合势均高于CK;(4)钵苗机插水稻主要生育期的群体干物质量均表现为处理D1>D2>D3>D4>D5,而单茎干物质量却表现出相反的趋势;(5)钵苗机插水稻在主要生育时期的叶面积指数及抽穗期群体的有效叶面积率、高效叶面积率及粒叶比均随密度的增加呈上升趋势,抽穗期群体的有效叶面积率、高效叶面积率及粒叶比D1处理极显著高于CK。本试验结果表明,在双季晚稻区不同类型水稻品种钵苗机插最适宜行株距为33 cm ×12 cm。
舒鹏1,郭保卫1,霍中洋1*,周年兵1,张洪程1,程飞虎2,陈忠平2, 陈恒3, 戴其根1,许轲1,魏海燕1
. 钵苗机插密度对双季晚稻产量及群体质量的影响[J]. 中国稻米, 2017
, 23(6)
: 23
-31
.
DOI: 10.3969/j.issn.1006-8082.2017.06.005
In order to study the effects of planting density with bowl mechanical-transplanting method on yield and population quality of double-cropping late rice and identify the suitable planting density, a field experiment was conducted using indica hybrid rice Wufengyou T025, indica-japonica hybrid rice Yongyou 538 and conventional japonica rice Xiaoyechishu with five planting densities (D1, 33 cm ×12 cm; D2, 33 cm ×13 cm; D3, 33 cm ×14 cm; D4, 33 cm ×15 cm; D5, 33 cm ×16 cm), and the conventional blanket seedling mechanical-transplanting as control(CK, 30 cm×13.2 cm). The experimental results were as follows: (1)The yield of the three types of rice increased with the increase of the density, under the same density, the yield of D1 treatment was significantly higher than that of CK, and the average yield of two years increased by 8.13%~9.50%; (2)The number of stems and tillers of nutrition bowl mechanical-transplanting rice were D1>D2>D3>D4>D5, compared with CK, slower reducing rate of tillers after jointing, higher ratio of productive tillers to total tillers at maturity; (3)Dry matter accumulation, population growth rate and photosynthetic potential of nutrition bowl mechanical-transplanting of three type rice were D1>D2>D3>D4>D5 during transplanting to jointing, jointing to heading, heading to maturity, the dry matter accumulation and photosynthetic potential of CK were larger than that of D1 from transplanting to jointing, but the dry matter accumulation, population growth rate and photosynthetic potential of D1 were higher than that of CK from jointing to heading and heading to mature; (4)Dry matter weight of population of nutrition bowl mechanical-transplanting rice during the main growth period showed D1>D2>D3>D4>D5, but the dry matter weight of per stem performed opposite trends; (5)Leaf area index of nutrition bowl mechanical-transplanting rice during the main growth period and the ratio of effective leaf area, ratio of leaf area from flag leaf to 3rd leaf, the ratio of grain to leaf at heading showed a rising trend with the increase of density, the ratio of effective leaf area, ratio of leaf area from flag leaf to 3rd leaf and the ratio of grain to leaf of D1 was significantly higher than that of CK at heading. The results showed that the density of 33 cm×12 cm with bowl mechanical-transplanting of double-cropping late rice is most appropriate.
[1] 江西省统计局. 江西统计年鉴[M]. 北京:中国统计出版社,2015:305-306.
[2] 张洪程,戴其根,苏祖芳. 机栽小苗水稻生育规律及高产途径的研究[J]. 江西农业大学报,1989(11):63-71.
[3] 张洪程,李杰,戴其根,等. 机插稻“标秧、精插、稳发、早搁、优中、强后”高产栽培精确定量关键技术[J]. 中国稻米,2010,16(5):1-6.
[4] 张洪程,赵品恒,孙菊英,等. 机插杂交粳稻超高产形成群体特征[J]. 农业工程学报,2012,28(2):39-44.
[5] 胡雅杰,曹伟伟,钱海军,等. 钵苗机插密度对不同穗型水稻品种产量、株型和抗倒伏能力的影响[J]. 作物学报,2015,41(5):743-757.
[6] 李华,陆亚琴,祝志刚,等. 水稻钵苗机插与毯苗机插生产力比较研究[J]. 中国稻米,2013,19(6):60-61.
[7] 邴延忠,陈宗凯. 水稻钵苗移栽机械化技术研发与应用[J]. 农机科技推广,2011(4):52.
[8] 孙德超,李晓东,姜阿利,等. 水稻钵育秧苗机插技术特点及其优势[J]. 农业机械,2010(20):69.
[9] 张洪程. 钵苗机插水稻生产特点及其利用的核心技术[J]. 农机市场,2012(8):19-21.
[10] 凌启鸿,张洪程,丁艳锋,等. 水稻高产精确定量栽培[J]. 北方水稻,2007(2):1-9.
[11] 尚志敏,张凤鸣,宋立泉,等. 水稻超稀植栽培技术增产因素的研究[J]. 黑龙江农业科学,1992(2):18-22.
[12] 张春山,金文龙,金炳植. 水稻稀植栽培适宜密度及其增产因素研究[J]. 吉林农业科学,1996(1):44-45.
[13] 王秀亮,唐守来,李成,等. 水稻稀植机插深施肥高产栽培技术研究[J]. 农机化研究,2001(1):71-72.
[14] 朱德峰,林贤青,陶龙兴,等. 水稻强化栽培体系的形成与发展[J]. 中国稻米,2003,9(2):17-18.
[15] 金传旭,钟芹辅,黄大英,等. 栽插密度与穴栽苗数对水稻产量及其构成因素的影响[J]. 贵州农业科学,2012,40(4):85-87.
[16] 董啸波. 密度对南方双季晚粳稻产量和群体质量及品质的影响[D]. 扬州:扬州大学,2013.
[17] 马均,陶诗顺. 杂交中稻超多蘖壮秧超稀高产栽培技术的研究[J]. 中国农业科学,2002,35(1):42-48.
[18] 陆阳平,张选怀. 水稻超高产栽培密度与肥料试验总结[J]. 安徽农业科学,2007,35(17):5112.
[19] 徐春梅,王丹英,邵国胜,等. 施氮量和栽插密度对超高产水稻中早22产量和品质的影响[J]. 中国水稻科学,2008,22(5):507-512.
[20] 吴春赞,叶定池,林华,等. 栽插密度对水稻产量及品质的影响[J]. 中国农学通报,2005,21(9):190-191.
[21] 农博. 农业部主推12项农机技术[J]. 北京农业,2012(13):35.
[22] 李木英,黄程宽,谭雪明,等. 不同机插条件下双季稻不同品种的产量和干物质生产力[J]. 江西农业大学学报,2015,37(1):1-10.
[23] 毛毳. 水稻钵体育苗机械插秧技术研究[J]. 科技致富向导,2011(6):326.
[24] 郭月明,林伟. 日本钵育摆栽机械超高产栽培试验研究[J]. 价值工程,2010(6):59.
[25] 陈必安. 钵育摆栽技术试验示范[J]. 农机科技推广,2008(1):55-56.
[26] 成永芳. 日本RX-6型水稻钵苗移栽机引进试验简报[J]. 粮油加工与食品机械,1999(3):28.
[27] 王圣田,栾云. 钵育摆栽技术综述[J]. 黑龙江科技信息,2009(13):111.
[28] 胡雅杰,邢志鹏,龚金龙,等. 钵苗机插水稻群体动态特征及高产形成机制的探讨[J]. 中国农业科学,2014,47(5):865-879.
[29] 朱聪聪,张洪程,郭保卫,等. 钵苗机插密度对不同类型水稻产量及光合物质生产特性的影响[J]. 作物学报,2014,40(1):122-133.
[30] 张洪程,朱聪聪,霍中洋,等. 钵苗机插水稻产量形成优势及主要生理生态特点[J]. 农业工程学报,2013,29(21):50-59.